New Wall mount design

Nax, 15pcs n Parallel to extend capacity

Lithium Iron Phosphate(LFP) Cell

SOC, Battery Status

Quick plug in +/- and parallel

CB 62619:2017, UN38.3,MSDS CE EMCEN61000-6-2/4

DHBG5.12kwhL

Description

General Specificatior
Nominal Voltage	51.2V
Rated Capacity	100Ah
Energy	5120Wh
Battery lmpedance	< 50 mQ
Charging Cut-off Voltage	56.16 V
Discharge Cut-off Voltage	45.6V
Recommend Charge Current	0.2 C 20 A
Max Charge Current	0°C~15°C: 20A; 15°C~45°C:50A
Max Continue Discharge Current	100 A, -20°C~60°C:65+20%RH
Operating Temperature Range	-20~60°C
Storage Environment (50% state of charge)	20°C ~ 45°C in three months; 25+3°C over three months; Humidity:65+20%RH
Environment	Indoor
Installation	Wall mounted/Floor stand
Cell Technology	Lithium-iron phosphate (LiFePO4)
Life Cycle	6000 times @80%DOD
Cooling	Natural convection
Protection Rating	IP65
Certificates	CBIEC62619.UN38.3.MSDS CE-EMC,EN61000-6-1/2/3/4:CE-GPSDEN62619
Dimension and Weight
Dimension	520470141.5mm
Battery Net Weight (Approx)	47.2KG
Communication instruction
RS232	Only for debugging, BMS can communicate with the host computer through theRS232 interface, so that various information of the battery can be monitoredhrough the host computer, including battery voltade. current temperature statusand battery production information, etc. The default baud rate s 9600bps.
CAN	For monitoring battery status, with isolated CAN communication, the defaul communication rate is 500K.
RS485	RS485 is used in parallel,with dual RS485 interfaces, can view the PACK information, the default baud rate is 9600bps.